Products Page


  • ZM-PCE-A type polycarboxylate high-performance water reducing admixture is currently the latest polycarboxylate salt type high-performance water reducing admixture inside and outside the country. Compared with the commonly used water reducing admixture, it has high water reducing rate, low dosage, good compatibility with cement, low slump loss and pollution-free, low alkali, low sodium sulfate, contains a slight amount of chlorine salt, non-corrosive, non-toxic, non-flammable, non-corrosive to steel, and harmless to human health, it is a green, environment-friendly product for construction.

  • This product is suitable for all types of pumping concrete, mass concrete, elevated highways, high-speed railways, bridges and hydraulic concrete. It is particularly suitable for key projects and concrete with special requirements. Through compounding, it can be formulated into hardening accelerating type or set retarding type high-performance water reducing admixture.

  • 1. The dosage range of this product is 0.5-1.0% (calculated based on the amount of cementitious materials), the optimal dosage can be adjusted and determined within the recommended range according to the requirements such as adaptability with the cement, temperature change, concrete slump and so on (special mixture can be made for projects with special requirements)
    2. According to the measurement, it can be directly mixed into the concrete mixer.
    3. When using this product, adaptability with the cement should be checked based on the concrete mix ratio.

  • 1. When the type of cement is changed or new cement is introduced, compatibility test with cement should be done.
    2. It must be correctly mixed according to the test mix ratio. When pouring the concrete, it should be strictly operated in accordance with the construction specifications.
    3. For concrete that requires set retardation, the concrete should be tested in advance to determine the setting time.
    4. It must not be used in combination with naphthalene admixtures, if it is used with other admixtures, its adaptability should be tested.
    5. Like conventional concrete, the maintenance must be strengthened according to construction.
    6. For concrete used in winter, except for the effect of admixtures, antifreeze insulation measures must be strengthened by covering with straw and plastic film, and the maintenance must be strengthened according to the construction specifications.
    7. When using this product, the factory should be notified 2-3 days in advance.

  • 1. It can be transported by tanker. Iron barrel 200kg/barrel, plastic barrel 50kg/barrel, it can also be specially packaged according to user requirements.
    2. This product has a one-year warranty, if there is precipitation during the warranty period, use after mixing does not affect the effect.